A 10-Point Plan for (Without Being Overwhelmed)

Standard Colors for Your Underground Utilities

It is now easier to know what an underground utility line is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. You dont want something disastrous to occur. Fatal injuries can happen if underground utility lines are struck. The location of the areas where the lines were struck can experience service interruption. To prevent these types of incidents, it is important for property owners to call 811 so utility companies can identify their undergoing lines. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

Sometimes, even if the lines are marked accidents still happen. The reality is that there is an incident almost every 6 minutes where utility line are struck. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. Public heath and safety is affected when this happens.

GPR or Ground Penetrating Radar is used by companies to locate their utility lines. With this machine, companies can easily locate utility lines. However, for the ordinary homeowner, it is enough to simply call 811 to be able to let companies located their lines.

There are certain colors that mark different utility lines for easy identification. Below are some of the colors used for different utility lines.

White lines are for proposed excavation sites. Area that will be excavated in the future are marked.

Temporary survey markings use pink lines. Surveyors use pink lines to mark off legal property boundaries.

If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. The color red is perfect for electric works because it is associated with fire and danger.

Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

Orange lines are used for communication, alarm, signal lines, cable or conduit. Blue lines are used for potable water. Purple lines are used for reclaimed water, irrigation, and slurry lines. If you see the color green, then it indicates sewer and drain lines. Hitting this line can truly derail any project for a long period of time.

You can learn more about the color coding of utility lines if you click here now! You can view here for more.